I am trying to setup last-mile node where a MikroTik hAP ac3 is the central hub with wired LAN, Wireless LAN and a connection to a UBNT dish.
At this point all nodes are in there default configuration except the hAP ac3 where I have configured WiFi as LAN.
When I connect the UBNT dish to port 5 for dtd the two nodes don't appear to communicate. In the MikroTik I see port 5 five as active.
Is there additional configuration I am missing?
Is this a supported/recommended configuration?
Would I be better off reverting back to MikroTik default firmware and having the hAP ac3 function as a flat switch and access point on the UBNT dish LAN network?
Thanks,
-JP
At this point all nodes are in there default configuration except the hAP ac3 where I have configured WiFi as LAN.
When I connect the UBNT dish to port 5 for dtd the two nodes don't appear to communicate. In the MikroTik I see port 5 five as active.
Is there additional configuration I am missing?
Is this a supported/recommended configuration?
Would I be better off reverting back to MikroTik default firmware and having the hAP ac3 function as a flat switch and access point on the UBNT dish LAN network?
Thanks,
-JP
Orv W6BI
I am starting to think the issue may be due to the fact that the hAP ac3 doesn't appear to have a mesh interface. With the 2.4Ghz WiFi set to LAN and 5Ghz set to off I am not clear what interface can access the mesh network. When I access the old UI setup the mesh section has the checkbox unchecked.
-JP
Orv W6BI
Me, too!
My hAP-ac3 failed to DtD connect on its 'DtD configured' port 4.
My hAP-ac3 started linking DtD connections after I also re-configured ports 2 and 3 as DtD.
After that ports 2, 3, 4, and 5 DtD connections were successful.
Maybe a restart or reboot helped. I don't know.
Anyone else seeing this issue?
73, Chuck
I reluctantly installed the nightly build and the hAP ac3 is now seeing the UBNT dish on the default dtd port 5. This looks like a bug with the 3.24.10 release for the hAP ac3.
FYI I have also enabled POE passthrough again and it is working with the UBNT dish.