You are here

Home » Forums » General discussion

403 Forbidden hitting downloads.arednmesh.org

7 posts / 0 new
Log in or register to post comments
Last post
Sun, 05/05/2024 - 18:16
#1
KM6IAU
KM6IAU's picture
403 Forbidden hitting downloads.arednmesh.org
From web browser or on node via "Firmware update" or "Package management".

Seems there may be recent change to the downloads web server disabling auto-indexes.  I see there is a new firmware selector: https://downloads.arednmesh.org/afs/www/ .  That seems to produce downloadable files.

Auto-indexes on the download server was handy.  That's too bad if it was decided to disable that.

But as it stands, my nodes are unable to grab the list of updates via the built-in "Refresh" button.

Also, the SSL cert is mismatch.  FWIW, I see nslookup.io returns a different IP address than I previously remember.

If I missed a post about this, my apologies... I did search.


 
Top
Sun, 05/05/2024 - 18:25
KM6IAU
KM6IAU's picture
... Aaaand now it is.
... Aaaand now it is browsable...

... but node still fails:
 

Looks like missing path.
Top
Sun, 05/05/2024 - 18:55
nc8q
nc8q's picture
From web browser or on node via "Firmware update" or "Package ma
'From web browser or on node via "Firmware update" or "Package management".'

From
http://localnode.local.mesh/cgi-bin/status
How do I navigate to reproduce your experience?
IOW, What is the URL of '"Firmware update" and "Package management"' ?

73, Chuck

 
Top
Sun, 05/05/2024 - 21:45
(Reply to #3)
KM6IAU
KM6IAU's picture
The URI is /cgi-bin/admin .
The URI is /cgi-bin/admin . You can see it in the address bar of my screenshot, if it is still legible.

but I see that "Firmware update" is working now.  "Package management" is still not:


I also see that the SSL certificate is valid now.
Top
Mon, 05/06/2024 - 07:26
nc8q
nc8q's picture
"Package management" is still not:
I see, now, what you found.
I attempted to 'Refresh' 'Package Management' on several of my nodes that have internet access:
Package Manager model
Success MikroTik hAP ac3
Failure GL.iNet GL-AR300M16
Success MikroTik hAP ac3
Success GL.iNet GL-AR750
Success MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)
Success MikroTik RouterBOARD LHG 5HPnD-XL
Success Ubiquiti PowerBeam M5 (XW)
Success Ubiquiti NanoStation Loco M2 XW
Failure GL.iNet GL-USB150
Success MikroTik hAP ac2
Success QEMU

 
Top
Mon, 05/06/2024 - 12:26
KN6PLV
KN6PLV's picture
We were migrating to a new
We were migrating to a new download server yesterday so things were a bit in flux. Let me know what problems persist today.
Top
Mon, 05/06/2024 - 17:56
(Reply to #6)
KM6IAU
KM6IAU's picture
I encountered this on a
I encountered this on a couple of Ubiquiti Powerbeam M5 300s, and also on a x86_64/qemu node. 
Firmware CANNOT be updated
Download failed!
wget: SSL support not available, please install one of the
libustream-.*[ssl|tls] packages as well as the ca-bundle and ca-certificates
packages.


I updated the powerbeams by uploading the firmware from the browser. 

(A note about that.. One powerbeam would not accept the firmware provided by AFS for the PowerBeam M5 300 XW.  I needed to feed it the firmware for the Nanostation Loco M XW.)

As for the QEMU device, it is not on the AFS.

I actually sysupgraded a QEMU device yesterday from within the node's admin page.  But the above screenshot is the result when trying to do the same (on a different QEMU device) today.

 
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer