You are here

Home » Forums » Hardware » Nodes

Firmware for Nanobridge M3?

5 posts / 0 new
Log in or register to post comments
Last post
Sun, 03/29/2020 - 01:52
#1
KR6CV
Firmware for Nanobridge M3?

Hi,
I am unsure which firmware to use to update my Nanobridge M3. Can someone direct me to the correct version?

Thanks

Stan KR6CV

Top
Sun, 03/29/2020 - 16:00
K6AH
K6AH's picture
Same as the ​NanoBridge 2G18 and ​NanoBridge 5G25

The line "NanoBridge 5G22" is a typo and should be "NanoBridge 3G22".  In other words, it's the same as the ​NanoBridge 2G18 and ​NanoBridge 5G25.  I'll see that it's fixed.  Thank you.
 

Top
Sun, 03/29/2020 - 16:20
K5DLQ
K5DLQ's picture
fixed on the software
fixed on the software downloads page
Top
Sun, 03/29/2020 - 19:29
(Reply to #3)
AE6XE
AE6XE's picture
there are 2 x 5GHz sizes --
there are 2 x 5GHz sizes -- one is a "5G22" - https://www.amazon.com/Ubiquiti-NanoBridge-InnerFeed-Technology-NB-5G22-US/dp/B0055PKSCK

The nanobridge M3 has only 1 model with gain of "​21.5 - 22.5 dBi".   It doesn't have a "22" in the model #.

Joe
Top
Sun, 03/29/2020 - 18:08
KR6CV
nanobridge 3
Thanks for the update!
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer