You are here

Home » Forums » Hardware » Nodes

NanoStation M2 - POE on Secondary Port

4 posts / 0 new
Log in or register to post comments
Last post
Mon, 03/11/2019 - 22:59
#1
AF6FB
AF6FB's picture
NanoStation M2 - POE on Secondary Port
Hello,
I have a NanoStation M2 running 3.18.9.0. Is there a way to turn on pass thru POE? I would like to run a second NanoStation by daisy-chaining them.

I found some old notes talking about a setting in the Advanced section, but the only setting I have there is "Advanced Mesh". But, these were on an older version of the firmware.

What am I missing?

Michael AF6FB





 
Top
Mon, 03/11/2019 - 23:34
AE6XE
AE6XE's picture
Michael,  the POE passthough
Michael,  the POE passthough feature is in the Nightly Build images, which is considered stable.    Along with POE passthough, both ports are used identically and at the same time.   In 3.18.9.0, the 2nd port is not functional.  

Joe AE6XE
Top
Tue, 03/12/2019 - 00:57
(Reply to #2)
AF6FB
AF6FB's picture
Thank you, I'll give that a
Thank you, I'll give that a try.

Michael AF6FB
Top
Mon, 03/11/2019 - 23:34
K6AH
K6AH's picture
That's not a released feature
That's not a released feature yet.  You will need to go to the nightly build to use this feature.

Andre, K6AH
 
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer