I just setup a Mikro Tik hAP AC lite Router I also bought a Mikro Tik LHG P5 Dish Antenna and was trying to flash it similar to the the same was I did the Router but it doesn't seem to work. When I to reset the Device by holding in the reset button the Tiny PXE Server never see the Device. I noticed that the LHG HP5 is on 192.168.88.1 so I mad sure my computer was on that Network. and I had the Factory Firmware downloaded and linked to the Tiny PXE.
Is there a different procedure for setting up this Device?
Is there a different procedure for setting up this Device?
It seems that you are not getting to step "4."
because if the device is responding to 192.168.88.1,
it is not in PXE client mode.
I suggest you try to install from the Router OS using the
instructions close to the top of the link above:
"The easiest way is to use the device’s reset button as described in the procedure below.
If for some reason this does not work, then you can try logging into the Mikrotik RouterOS and
setting System > Routerboard > Settings > Boot Device to try-ethernet-once-then-nand
(either through the RouterOS web interface or via command line).
Next time the device boots it will try Etherboot once before defaulting back to regular boot mode."
73, Chuck
2. ...immediately navigate to the Firmware Update section.
Browse to find the sysupgrade bin file you previously downloaded and click the Upload button.
;-)
Ed
Please, more details.
Where were you in the install process?
'the File'
Exactly which file?
'says it does not recognize'
What is 'it', Router OS, PXE server, dmsmasq, boot of factory.bin ?
73, Chuck
Mikro Tik LHG P5? Do you mean LHG HP5? LHG5? XL? AC? US?
There are so many variations of these products, how about taking a picture of the product id label and posting. Someone here with more experience might spot a firmware mismatch to what you are doing.
Ed
Now I have my Mikro Tik hAP ac lite and my Mikro Tik LHG HP5 both talking to each other and have turned on the POE on the hAP.
Thanks everyone for the help. No one around here yet to connect to bbut I have been having some meeting promoting Mesh and there is lots of intrest so we just need to get some guys going.
Ted
AC7II
Marvelous.
Tyler is active in our local Southwest Ohio AREDN network.
I suggest that you reach out to KG7QWU.
I see 2 of his nodes on the World Map and on our local SUPERNODE link page.
Richard may be able to assist you with a tunnel and in promoting AREDN in Utah.
73, Chuck