This will be my first foray into converting a Mikrotik device (hAP) to AREDN. I am awaiting its arrival and was preparing for the conversion. The instructions seem easy to follow and I'm comfortable doing this after doing so many Ubiquiti devices using TFTP.
I followed the directions from AREDN, downloaded the TinyPXE and was able to open the config.ini file in notepad. I was ready to add the line rfc951=1 under [dhcp]
Below is what opened (I left off all rest below the filename line) and before I did any modification, I noticed that there are two new lines added that I highlighted in bold and one is a reference to rfc951=1 but it is not under [dhcp]
This does not look like the pics of this file in the AREDN instructions (The power point, and in Rays youtube video).
Am I missing something here or has there been a change to Tiny PXE and if so, does the rfc951=1 line still need to be added or can we now use the config.ini file without modification?
Regards
Bob
KE6GYD
[arch]
I followed the directions from AREDN, downloaded the TinyPXE and was able to open the config.ini file in notepad. I was ready to add the line rfc951=1 under [dhcp]
Below is what opened (I left off all rest below the filename line) and before I did any modification, I noticed that there are two new lines added that I highlighted in bold and one is a reference to rfc951=1 but it is not under [dhcp]
This does not look like the pics of this file in the AREDN instructions (The power point, and in Rays youtube video).
Am I missing something here or has there been a change to Tiny PXE and if so, does the rfc951=1 line still need to be added or can we now use the config.ini file without modification?
Regards
Bob
KE6GYD
[arch]
;will over rule the bootp filename or opt67 if the client arch matches one of the below
;00006=bootia32.efi
;00007=bootx64.efi
;00009=bootx64.efi
[dhcp]
;below is applicable only if proxydhcp=0
rfc951=1
;needed to tell TFTPd where is the root folder
root=files
;bootp filename as in http://tools.ietf.org/html/rfc951
;filename=ipxe-undionly.kpxe
filename=ipxe.pxe
_._,_._,_
Joe AE6XE
Thanks
[dhcp]