There are NO alerts at this time.
There are NO alerts at this time.
AREDN encourages users to load (http://www.arednmesh.org/content/software click Release Candidates) and test version 3.17.1.0RC1 and report any issues to the Forum.
These notes accompany our 3.17.1.0 Release Candidate-1 and describe changes since our last major production release, v3.16.1.0.
Added support for additional Ubiquiti devices which are now flagged as “In testing”:
Added support for newer TP-Link device revisions:
CPE210 v1.1
Don Rotolo, N2IRZ wrote an article, published in the January 2017 edition of CQ Magazine, updating readers on the world of mesh networking.
We present the full article here, which was reprinted with permission from the January 2017 issue of CQ magazine, copyright CQ Communications, Inc.
Hi AREDN Meshers!
The AREDN Team is looking for a few good men (and ladies)! The new mapping feature that is in 3.16.1.0 needs your help.
As some of you have seen, we have a good, workable KML map file. We would like to hold a contest to use that KML to create the best HTML based map that we can host on the www.arednmesh.org website.
CHALLENGE:
To create an HTML embedded map that utilizes the AREDN kml files that can be hosted on www.arednmesh.org.
SKILLS REQUIRED:
Front-end web development: Javascript, CSS, etc.
AREDN PROVIDED SERVICES/FILES:
REQUIREMENTS:
Your map should include (at minimum) the following (optional) query string parameters:
Full functionality of both ports on Nanostation M2 and M5 XW units is now available.
Joe AE6XE found a way to remove the limitations noted in the forum thread. Both Ethernet ports on the Nanostation M2/M5 devices are now configured and working without limitations. This code will be available after tonight's build on Nov 22, 2018. Text included in the AREDN GitHub README:
The following devices have enhanced Ethernet port usage.
A single CAT5 cable to the device could be plugged into ether the 'main' or 'secondary' port with standard port functionality. Both ports can be used interchangeably and simultaneously with LAN devices on both ports at the same time. POE PassThough can be turned on in Advanced Settings to power IP cameras or other mesh nodes. It is passive' POE, which means whatever voltage you supply the M5 XW with, that voltage is passed though to the secondary port and device. It could be between...
Read More
Local amateur radio operators are responding to the recent and ongoing fires in California in many ways. Several of these hams have built a high-speed multimedia AREDN mesh network which was used to deliver live streaming video of the fires in progress.
In Ventura County, Orv Breach W6BI, Paul Straus WD6EBY and Ben Kuo AI6YR installed high-definition cameras in their portion of the growing Southern California AREDN network. They were able to figure out how to send to live video stream across the mesh network to then Internet and finally to YouTube for public access.
Ben AI6YR reports that their mesh network stayed operational even when the Spectrum cable, Internet access and phone system went down across the region. People were able to use the mesh network to keep updated on emergency information.
The start of the “Woolsey Fire” from Simi Valley, courtesy of Orv W6BI and the Pleasant Valley Amateur Radio Club
https://www.youtube.com/watch?v=cowdbebnX5o
The fire in Santa Paula, California (Briggs...
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer