You are here

PowerBridge will not upgrade to 3.23.4.0

4 posts / 0 new
Last post
ng1p
ng1p's picture
PowerBridge will not upgrade to 3.23.4.0

I have a PowerBridge that works only with ar71xx firmware using Rocket M firmware, It loads 3.22.8.0 and works fine. With upgrading to 3.23.4.0 if will brick it.

So aredn-3.22.8.0-ar71xx-generic-ubnt_rocket-m-squashfs works....
upgrading to aredn-3.23.4.0-ath79-generic-ubnt_rocket-m-squashfs does not work

I tried the PowerBridge factory and Rocket-M factory of 3.23.4.0 and also bricks it. 

Any thoughts? I have attached the support file.

Thank you Bill NG1P



 

GZIP File Attachment: 
KD1HA
KD1HA's picture
I also experienced the same
I also experienced the same and I have over 20 PowerBridges. I stopped at 3.22.8.0 for the same reason. I had a problem with the the PowerBridge firmware several years ago and with the help here on the forum found out that the rocket firmware worked better. Now I just leave them alone.

Denis KD1HA   
ng1p
ng1p's picture
ng1p's picture PowerBridge will not upgrade to 3.23.4.0

I found I had two other Powerbridges on the shelf. One took the PowerBridge factory images and works fine on 3.23.4.0. The other one worked with the Nanostation Tiny M at 3.23.4.0. And this one in question that is not working will only work with the aredn-3.22.8.0-ar71xx-generic-ubnt_rocket-m-squashfs version any and all device type versions at 3.23.4.0 will brick it. Its interesting that I have 3 Powerbridges, 2 are able to run on 3.23.4.0 but all 3 are using different device type firmware?  

For now I will place a note on this one that cant be upgraded to keep me from making a road trip.

KD1HA
KD1HA's picture
As a test I used 2 with the
As a test I used 2 with the factory firmware and I had an issues updating one of them too. Inherent Ubiquity problem.    

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer