You are here

Home » Forums » General discussion

PowerBridge M5 firmware check failed

10 posts / 0 new
Log in or register to post comments
Last post
Fri, 05/15/2020 - 23:45
#1
KD1HA
KD1HA's picture
PowerBridge M5 firmware check failed

I'm unable to TFTP  a PowerBridge M5 "firmware check failed"   3.20.3.0 factory. My first PowerBridge but I have done many others without a problem.

Thanks in advance,
Denis 

Top
Sun, 05/17/2020 - 08:25
KD1HA
KD1HA's picture
Has anyone successfully
Has anyone successfully loaded the aredn-3.20.3.0-ar71xx-ubnt-nano-m-factory.bin into a PowerBridge by TFTP?
Top
Sun, 05/17/2020 - 20:08
K5DLQ
K5DLQ's picture
Have you tried the prior
Have you tried the prior version?   3.19.3.0?
 
Top
Sun, 05/17/2020 - 20:54
KD1HA
KD1HA's picture
Yes but unable to fine
Yes but unable to fine PowerBridge M5 version.
Top
Mon, 05/18/2020 - 20:45
AE6XE
AE6XE's picture
Double check, you are trying
Double check, you are trying these images:

3.20.3.0:  http://downloads.arednmesh.org/releases/3/20/3.20.3.0/targets/ar71xx/gen...

3.19.3.0:  http://downloads.arednmesh.org/releases/3/19/3.19.3.0/targets/ar71xx/gen...

Joe AE6XE
Top
Tue, 05/19/2020 - 19:37
KD1HA
KD1HA's picture
Thanks Joe and Darryl,
I did not and do not know where to find your referenced firmware and I also did not know about "targets" I was looking for the "PowerBridge M5" 3.19.3.0 in the older firmware section based on Darryl's suggestion but couldn't find it. For whatever reason the 3.20.3.0 PowerBridge version in Downloads doesn't work as I described above however the Rocket m factory 3.19.3.0  did work for me in the earlier firmware section.  

Where are the above images kept and what is the uses for target? Missed the boat on this one. 

Thank you,

Denis
Top
Tue, 05/19/2020 - 21:26
(Reply to #6)
AE6XE
AE6XE's picture
Denis, the links above are
Denis, the links above are direct to download the firmware for the respective versions of AREDN for the Powerbridge.  Please confirm you are attempting to tftp load one of these images.

Joe AE6XE
Top
Wed, 05/20/2020 - 20:34
(Reply to #7)
KD1HA
KD1HA's picture
Firmware Results

Joe,

tftp -i 192.168.1.20 PUT f:aredn-3.20.3.0-ar71xx-ubnt-nano-m-factory.bin
Error on server : Firmware check failed

tftp -i 192.168.1.20 PUT f:aredn-3.19.3.0-ubnt-nano-m-factory.bin
Transfer successful: 5898652 bytes in 8 second(s), 737331 bytes/s

Also the the following worked:
aredn-3.19.3.0-ubnt-rocket-m-factory.bin

I also updated using the aredn-3.20.3.0-ar71xx-ubnt-nano-m-sysupgrade.bin successfully. 

Thank you again,
Denis

Top
Wed, 05/20/2020 - 21:19
(Reply to #8)
AE6XE
AE6XE's picture
Support Data
Denis,  can you please capture a support data file and upload here?  link is at bottom of Administration page.  I want to check which version of Ubiquiti's bootloader is on the device. 

Joe AE6XE  
Top
Wed, 05/20/2020 - 23:03
(Reply to #9)
KD1HA
KD1HA's picture
Here you go...

KB1JFG is 3.20.3.0
KD1HA is the Rocket 3.19.3.0

 

Support File Attachments: 
File supportdata-KD1HA-PBM5-201901301230.tgz
File supportdata-KB1JFG-PBM5-2-202002272108.tgz
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer