Just curious, has the OTA sysupgrade method stabilized? I was reading older messages where older versions of firmware (upon upgrading) would revert to factory fresh and not save the configuration.
You are here
OTA firmware updates
Mon, 09/03/2018 - 19:38
#1
OTA firmware updates
Mon, 09/03/2018 - 20:27
#2
w6bi
OTA
If you remember to check the Keep Settings box, and the system you're upgrading is running 3.16 firmware, you should be good to go. You may need a reboot prior to uploading to 'clear RAM'. If the node is running older firmware, it's a bit more involved IIRC (it's been a long time since I used the older stuff).
Tue, 09/04/2018 - 00:54
#3
k1ky
OTA
If coming from 3.16, make sure that the WAN port is set to DHCP. Static setting will brick the node.
Mon, 09/03/2018 - 22:15
#4
K5DLQ
It's stable now. A reboot
It's stable now. A reboot before starting is a good idea.
Wed, 09/05/2018 - 10:10
#5
Thanks
The feedback is appreciated.
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer