Hi,
i set up two AirRouter with nightly build aredn-120-xxx.
Notebook on Lan Port 1 and M5 loco on Port 4 did not work.
Notebook gets a DHCP on Port 4 and Node is visible when connected on port 1.
So VLAN function seems to be switched.
Please change the picture under https://www.arednmesh.org/content/how-use-airrouter-ports if this behavior is intended.
I'm using the AirRouter to advertise several services for a portable setup. This way there is no need for reconfiguring M5 nodes with the services every time when switching between Bullet, Loco and PowerBeam.
73 Timm DL4FLY
i set up two AirRouter with nightly build aredn-120-xxx.
Notebook on Lan Port 1 and M5 loco on Port 4 did not work.
Notebook gets a DHCP on Port 4 and Node is visible when connected on port 1.
So VLAN function seems to be switched.
Please change the picture under https://www.arednmesh.org/content/how-use-airrouter-ports if this behavior is intended.
I'm using the AirRouter to advertise several services for a portable setup. This way there is no need for reconfiguring M5 nodes with the services every time when switching between Bullet, Loco and PowerBeam.
73 Timm DL4FLY
Be sure to upgrade to the current nightly build. there are now changes to reduce the RAM usage and we're looking to determine if the changes are sufficient to be stable on 32Mb devices and if we can find more things to take out that won't affect core functionality. The build you have currently loaded may not be problematic.
Joe AE6XE