I'm planning a large installation this Saturday on two commercial towers here in Southern California. In the planning process I didn't know where to turn for mounting accessories for these large-legged beasts.
... so I thought I'd share a few sites I've found.
- http://www.izzyindustries.com/wp-content/uploads/2015/02/izzy2016catalogweb.pdf
- http://www.sitepro1.com/store/cart.php#
- https://www.talleycom.com/infrastructure
Anyone want to add their sources for this hardware?
Andre, K6AH
http://www.commscope.com/catalog/doc/pdf/2125/Pipe_Mount_Kits.pdf
This is so you can mount a pole offset to the tower. Unless you mount on the horizontal you've got to deal with the slant. You can find these at hamfests sometimes, usually connected to a DB420 UHF antenna. Online they go for around $60, and then you'll need a small section of mast/pole to connect to the other side of the mount.
It's great that you get to play around this stuff....much different than the typical ham tower!
http://www.ebay.com/itm/DB365-0S-Commscope-Andrew-Solutions-Mounting-Cla...
The big boys use this stuff
http://www.rohnnet.com/tower-and-site-accessories
looking at the web site it would seem that Talley is a distributor out your way
https://www.talleycom.com/viewCategory?id=HOME.COMPONENTS.TOWERAPP
Back east here I have bought stuff from Tessco - they carry Rohn and Commscope among others
https://www.tessco.com/search?category=Structural+Support|Tower+Mounts