You are here

Home » Forums » Hardware » Nodes

Signal to Noise Ratio data and graph

8 posts / 0 new
Log in or register to post comments
Last post
Tue, 07/26/2016 - 15:45
#1
Ai6bx
Signal to Noise Ratio data and graph
interesting situation on my NanoStation M2 as my S/N ratio no lo longer shows data and graphs allowing me to check and compare links. I am very interested in seeing this now as I just installed several RF Armour shields and want to see the difference.

any ideas? I tried a reboot.

Keith
Top
Tue, 07/26/2016 - 15:57
Ai6bx
I should have clarified
I should have added that I am using the latest version of AREDN on the node.
Top
Tue, 07/26/2016 - 16:23
(Reply to #2)
AE6XE
AE6XE's picture
Keith, the history data is
Keith, the history data is stored only in RAM. Consequently, it is not preserved across reboots. Check to see if it has started to accumulate already?
Top
Tue, 07/26/2016 - 17:31
Ai6bx
NothI got new
Nope, no data accumulating and the screen still shows N/A.
Top
Tue, 07/26/2016 - 17:57
K6AH
K6AH's picture
Are you connected?
Does your Mesh Status page show you're actually connected to another node?
 
Top
Tue, 07/26/2016 - 18:46
Ai6bx
Yep"
yes, from the mesh status page I see at least six other modes connected and all services are working properly as confirmed by the ability to access services through the node in question.
Top
Tue, 07/26/2016 - 18:58
K5DLQ
K5DLQ's picture
which browser are you using? 
which browser are you using?  Have you tried a different one to see if it acts differently?
Top
Tue, 07/26/2016 - 21:17
Ai6bx
Updates
Yes, the node communicating with everything else and I have used all different browsers, Safari, Explorer, Chrome, and Firefox. The S/N is working on the other seven attached nodes with each browser so it is just the one node that is not functioning. Weird.
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer