You are here

Tunnel servers for new node?

18 posts / 0 new

Topic locked

Last post

Sun, 03/06/2016 - 15:51

#1

K6LUD

Tunnel servers for new node?

Hi,

I have just setup a node (K6LUD) at my place in Santa Barbara, but I do not have (yet) any other reachable node.
Anybody willing to share a set of credentials with me so that I can join the network via tunnel?

(I can also acts as server if that makes things easier, but my Internet IP is dynamic and will be via dynamic DNS entry).

Thanks!
Ludovico
K6LUD

Sun, 03/06/2016 - 19:52

#2

kj4pvx

kj4pvx's picture

No Problem

Sure,

Send me your node name. And I'll get you set up as a client on my server (KJ4PVX-SERVER). I'm currently working to establish a mesh network in the Tampa Bay Area.

Hank Billings
KJ4PVX

Sun, 03/06/2016 - 20:06

(Reply to #2) #3

K6LUD

Hi Hank,

Hi Hank,

Thanks. My node name is just K6LUD. I could not find a way to reply privately in the website. Can you send me the credentials at ludovico.cavedon@gmail.com, please?

Thanks, Ludovico K6LUD

Mon, 06/06/2016 - 09:03

(Reply to #3) #4

K4SPT

mesh client connection

Hi, currently constructing a mesh network for Oak Island in southeastern NC. I also have an AirRouter at the home QTH.

Looking to extend our mesh into others on the SE Atlantic coast. Anyone will to share the tunnel?

Node name: K4SPT-2N01 (two-Nancy-zero-one)

73
Jim K4SPT

Sun, 03/06/2016 - 20:11

#5

kj4pvx

kj4pvx's picture

here you go

If you're node name is in fact just K6LUD then just enter the below information where is says tunnel client.

...........deleted after the fact.

Mon, 03/07/2016 - 00:41

#6

KG6JEI

It would probably be better

It would probably be better to find somone local to you so that way your on your local area network instead of a remote area. There is a LOT of SOCAL activity.

Mon, 03/07/2016 - 16:07

#7

w6bi

Try KE6BXT

Ludovico, drop a note to Don Hill, KE6BXT (donhill@gmail.com) He's in Southern California and provides tunnels for many folks.

Orv
W6BI
Simi Valley, CA

Tue, 03/08/2016 - 02:33

#8

K6LUD

Thanks

I will write Done, thanks everybody!

Ludovico

Sat, 03/26/2016 - 14:23

#9

w6bi

Santa Barbara Mesh

Ludovico, as we speak Tom King KA6SOX is putting a node up on Gibraltar Peak, pointed at downtown Santa Barbara. It will be on channel -2, 10 MHz, with default SSID. He requests that you point your node at Gibraltar and report back.

Thanks!

Orv
W6BI

Sat, 03/26/2016 - 15:04

#10

kj6dzb

kj6dzb's picture

Im waiting for my new ISP to

Im waiting for my new ISP to drop fiber in to my qth and will have static IP's. I would realy like to provide a tunnel server then! in the next month or 2. up untill now its been impractical with Comcast.

73 kj6dzb Mathison
SF bay area

Mon, 03/28/2016 - 13:46

(Reply to #10) #11

KG6H

Why is running a tunnel

Why is running a tunnel server impractical with Comcast? Mine is working fine. BTW, if you're connected to mesh islands over there, I'd like to connect my tunnel server with your node.

Mon, 03/28/2016 - 14:06

#12

k1ky

Comcast works just fine

I have 5 tunnel servers working just fine with Comcast. All you need to do is open up port 5525 on your Comcast router to the MESH device that you are wanting to be the Tunnel server. (I usually fix their IP addy so it doesn't move around). It doesn't matter if they are running fiber, coax or twisted pairs (DSL). Tunnel outgoing clients work on everything I've tried so far, including my FREEDOMPOP cellphone data modem that I am using right now from a Campground in Tennessee.

Sat, 04/30/2016 - 15:50

#13

wa2ise

wa2ise's picture

I have a node in NNJ, and

I have a node in NNJ, and have one tunnel connection already (W2US), but would like to have more connections. I'd be a client. It's a Linksys hsmm mesh router with tunnels enabled.

My node is "WA2ISE-OradellNJ002"
              and as I understand it, I'll need info such as a server IP
              address, the password, and network IP address.

73s  Bob

Thu, 06/09/2016 - 15:45

#14

M0XXF

Send me the node details and

Send me the node details and I'll add you to my server in the UK if you'd like

John / M0XXF

Fri, 12/09/2016 - 21:06

#15

Kd6mtu

Add

Building out a mesh in northern ca. if you want a tunnel to me email me at guy@netsusa.net

Sat, 12/10/2016 - 01:54

#16

KE6UPI

What software is aredn using

What software is aredn using for the tunnels??

David

Sat, 12/10/2016 - 10:12

(Reply to #16) #17

Ai6bx

Tunnel built in

David,

AREDN has the tunnel software built-in to the nodes. Clicking the tunnel link under the setup tab will prompt a sequence to download the server and client for the tunnels..

Keith - AI6BX

Sat, 12/10/2016 - 10:18

(Reply to #17) #18

AE6XE

AE6XE's picture

Close this thread and move to

Close this thread and move to a new topic to, so it is searchable to find in the future:

http://www.aredn.org/content/what-software-aredn-using-tunnel

Topic locked

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer