I can't flash (get error) this antenna with https://downloads.arednmesh.org/afs/www/?version=3.24.6.0&target=ath79%2...
It is not the right model for the firmware ?
It is not the right model for the firmware ?
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
https://docs.arednmesh.org/en/latest/arednGettingStarted/installing_firm...
Hope this helps.
73
Orv W6BI
I was able to flash the radio (but it took me almost 2 hours). I was used to Powerbeam M5s, easy to flash with tftpd, I didn't know that it was necessary to do otherwise and also have a precise version of AirOs.
73 from Switzerland!
https://docs.arednmesh.org/en/latest/arednGettingStarted/installing_firm...
airOS version required... (from the above help file)
But if you see any version other than 8.7.0 you must upload new firmware to the device.
Richard ko0ooo
Which Ubiquiti device?
Which factory.bin file?
For what URL or IP address did you look?
From where did you look (computer's IP address)?
73, Chuck
aredn-3.24.6.0-ath79-generic-ubnt_rocket-5ac-lite-squashfs-factory.bin
192.168.1.1
I tried both loading the file with the the tftp D 64 program and it loaded. But when I came back to my Browser and made my Computer DHCP then typed 192.168.1.1 it just timed out and gave a 404 error.
I tried this several times and got the same results.
Then I went into the CMD terminal and ran the command tftp.exe -i 192.168.1.20 Put C:\tmp\ aredn-3.24.6.0-ath79-generic-ubnt_rocket-5ac-lite-squashfs-factory.bin.
This took several seconds and then return with no errors. Going back to the DHCP I still go the same results were it timed out with the 404 error.
I have reset the device and loggeg into the R5ac and looked at what the default AirOS firmware was and it was v7.0.3
So try ing any of the files that is in the documentation to upgrade or Downgrade they all fail but they are for a different model. I have put in a jpg of the setting page of the Air OS
Richard ko0ooo
here's what I've found...
https://community.ui.com/questions/Rocket-AC-Lite-Firmware-image-check-f...
and this...
where s (XC) V7.1-rc firmware
Need to upgrade old Rocket M5AC-PTP
Don't know why do you need a firmware that old, but I found it here: http://dl.ubnt.com/firmwares/XC-fw/v7.1/XC.v7.1-rc.25252.141122.1734.bin
It's a required intermediate step when upgrading older XC radios that originally shipped with v7 firmware.
Richard ko0ooo