Hello Guys!
I have converted 2 of the hAPac Lite units and they seem to work. I get 54Mb/s on my link between the two of them. I am running 20MHz chan width.
is this normal for these units?
73,
Ron
I have converted 2 of the hAPac Lite units and they seem to work. I get 54Mb/s on my link between the two of them. I am running 20MHz chan width.
is this normal for these units?
73,
Ron
Hi, Ron:
A TxMbps of 54.0 is odd.
If you ssh into the node and issue
iw wlan0 station dump
more information will be returned.
If you are using 20 MHz bandwidth and 2 GHz channels,
you should get up to 130.0/144.4 TxMbps.
If your LQ/NLQ is 100%, a TxMbps of 54.0 should not be displayed.
58.5 maybe, but not 54.0.
:-|
73, Chuck
I am running on 5ghz chan 158 may be 30 feet apart. one node in the house one in the garage in the network rack. I ttok your advice and am moving everything to 5GHz
MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)
Hi, Ron:
My hAP-line does not offer 5 GHz AREDN channels.
I see only 5 GHz Access Point or Client.
What firmware are you running?
None of my '5ac' devices link at 802.11n/ac speeds.
(LHG-5ac-XL, SXTsq-5ac, hAP-5-ac3)
They all link at 802.11a/g speeds; Maxmimum 54 TxMbps. Weird.
73, Chuck
Edited 12/14/2023: added line feeds for easier reading. :-|
IMHO, 54Mbps is abnormal.
An 802.11n MCS would be normal.
Ed
73, Ed