You are here

Go back to previous firmware version

6 posts / 0 new
Last post
KB1OTI
Go back to previous firmware version
I have a GL.iNet GL-AR750  I updated to 3.23.4.0 but I am having tunnel issues.  Is it possible to go back to 3.22.12.0?

I have the aredn-3.22.12.0-ar71xx-generic-gl-ar750-squashfs-sysupgrade.bin file.

I tried to upload it from the administration page but I just get an error that it is the wrong device.

 
AB7PA
Check out the documentation here
k1ky
k1ky's picture
Why not move forward?

I'm suspecting some new options introduced may be the issue. . Why not check the Advanced settings  Make sure that the WAN access option is enabled (this may be a new setting) or maybe even move forward to the latest Nightly?  If you need more help, contact me direct.  I have AR750 Creta working fine - walked through all of the upgrades for years with little issues.  Currently on N20230629

KB1OTI
I did end up rolling back for
I did end up rolling back for now.  I am going to attempt an upgrade again in the coming weeks.  It is a Tunnel Server with other hams connecting into the mesh so I can't keep it down for an extended period of time without impacting them.  I did try the latest knightly build before rolling back and nothing was connecting.
K6CCC
K6CCC's picture
Confirmed, no tunnel on AR750
Initial test confirms AR750 with Nightly Build 20230629 using WiFi as Internet source will not connect as a tunnel client.  I will do some additional testing this evening when I'm not having to do it remotely.
 
k1ky
k1ky's picture
No Wi-Fi Tunnel on AR750
Same here when MESH 5GHz is enabled - no WI-Fi WAN Tunnel.  May be related to the issue where 5GHz Wi-Fi scans don't show standard Wi-Fi stations.  Could be OPENWRT issue?

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer