I have setup 4 CPE210's for AREDN use. Each CPE210 is facing a cardinal direction. My question is, can they all be on -2 or do I need to change the channel for each one so they have some seperation?
Thank you
Michael D. Hopwood JR
SGT USARMY RET (US)
KE5EUA / WRJV225
--... ...--
;IGY6
Thank you
Michael D. Hopwood JR
SGT USARMY RET (US)
KE5EUA / WRJV225
--... ...--
;IGY6
"can they all be on -2 or do I need to change the channel for each one so they have some seperation?"
Hi, Michael:
This is not a recommendation, but to answer your question... you may leave them on the same channel.
If you set the location (lat/long) and configure Link Quality Manager, you can let them route via DtD instead of RF.
Channels should be be non-overlapping.
I wish you had asked a question about 4 CPE510s or 5 GHz devices.
73, Chuck
As far as not recommended, do you mean having 4 cpe210's 90 degress apart or the channels overlapping.
I am seeing DtD links in the dashboard.
Thank you,
Michael
Hi, Michael:
I mean I do not recommend 2.4 GHz for outdoor linking...especially multiple devices at the same site on 2.4 GHz.
On 2.4 GHz there is only 1 exclusive Amateur Radio channel available...and only at 1/2 standard bandwidth.
On 5.8 GHz there are several 20 MHz bandwidth channels exclusively Amateur Radio.
73, Chuck
Thank you,
Michael