I installed AREDN (aredn-3.22.12.0-ar71xx-generic-mr16-squashfs-sysupgrade.bin) on a Meraki MR-16. (Yay!) I did install an older version of OpenWRT 19.07.5 first, as indicated in the instructions I followed, and I did set the Mac address.
On my first boot, when I enter in some basic information and try to save it, I get the following message:
|
When I look at the file in question, it starts like this:
wifi_proto = static
wifi_ip = 10.<MAC2>
wifi_mask = 255.0.0.0
wifi_ssid = AREDN
wifi_mode = adhoc
wifi_txpower = 19
wifi_channel = 1
wifi_chanbw = 20
wifi_distance = 0
wifi_country = 00
I suspect the issue is on the second line.
When I run `ifconfig | grep HWaddr`, I see the Mac address, so I think it is set correctly. I don't know how to check beyond that.
br-lan Link encap:Ethernet HWaddr 00:18:0A:31:4F:2A
eth0 Link encap:Ethernet HWaddr 00:18:0A:31:4F:2A
I have power-cycled the device. I've seen references to holding a reset button for 15 seconds, but I don't see a reset button.
How do I fix this?
I have power-cycled the device. I've seen references to holding a reset button for 15 seconds, but I don't see a reset button.
How do I fix this?