You are here

Home » Forums » Hardware » Network Switches

Ubiquiti ToughSwitch TS-8-PRO 3 LAN 4 Node 1 WAN

5 posts / 0 new
Log in or register to post comments
Last post
Thu, 10/06/2022 - 21:37
#1
K0JNR
Ubiquiti ToughSwitch TS-8-PRO 3 LAN 4 Node 1 WAN
I'm trying to setup 3 Rocket M5s and one Mikrotik hAP with DTD.  I'm also trying to setup 3 LAN ports assigned to the hAP.  I can't seem to get the DTD work right with this router and the 4 NODES.  Are there any Issues with trying to do DTD with an hAP?  I've also extended the hAP land connections to 13.

Basic config is 
1 Management TTTTTTTU
2 DtD   TTTTEEEE
11 Vlan11.  EEEEUUUE

Port 1 - M5
Port 2- M5
Port 3- M5
Port 4-hAP
Port 5-LAN
port6-LAN
port7-LAN
port8-WAN

73s
Jim-K0JNR
Top
Fri, 10/07/2022 - 06:05
nc8q
nc8q's picture
Ubiquiti ToughSwitch TS-8-PRO 3 LAN 4 Node 1 WAN
Perhaps:
VLAN Ports
 1 TTTTTTTU
 2 TTTTEEEE
11 UEEEEEEE
22 EUEEEEEE
33 EEUEEEEE
44 EEEUUUUE

Port 1- M5
Port 2- M5
Port 3- M5
Port 4- hAP
Port 5- hAP LAN
Port 6- hAP LAN
Port 7- hAP LAN
Port 8- WAN
 
Top
Fri, 10/07/2022 - 10:30
(Reply to #2)
K0JNR
Thanks, I will give that a
Thanks, I will give that a try.  I guess I need a course in VLANs.

Jim
Top
Sat, 10/08/2022 - 14:19
(Reply to #3)
nc8q
nc8q's picture
I guess I need a course in VLANs.
https://www.arednmesh.org/content/understanding-vlans
 
Top
Tue, 10/11/2022 - 08:00
(Reply to #4)
K0JNR
Thank you.  I now have it
Thank you.  I now have it resolved.  I had purchased some used ToughSwitch 8 Pro, which is now EdgeSwitch 8XP.  Well, I had updated them to the latest firmware. I guess even though the firmware updated, it was not compatible.  The VLAN configs would not work properly.  I backed it down to the original firmware and they are now working properly.  all 3 rockets and the hAP are now dtd linking properly.

Jim-K0JNR
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer