RESET Iinstructions -- MikroTik Routers rb952ui-5ac2nd
While the device is powered off press hold the reset button, without releasing the reset, power on the device, when the usr led starts to flash release the reset button immediately...
Let it boot and it should be like before...
( 79 times ) --- I did the RESET then add power wait to bootup and NAH DAH.
Only GREEN lights: PWR and USR green lights
how ? what have you found to be the best instructions ?
please can someone offer detailed directions how I can fix ?
https://arednmesh.readthedocs.io/en/latest/arednGettingStarted/installing_firmware.html#mikrotik-first-install-process
My RB952 has taken over 16 minutes to reboot after a firmware load.
Just because the lamps momentarily stop blinking after about 4 minutes, does not indicate that the install is finished.
The device may respond as though 'bricked' until the firmware install has finished.
I hope this helps,
Chuck
The delay in updating the firmware in my RB952...(hAP) may be memory write/rewrite speed and not processor speed.
If I am to assist you in loading AREDN firmware onto your device, you must be following instructions on this site.
If you are following other instructions, please let me know so I can delete my responses.
73, Chuck
Out of respect. (GREAT ADVICE)
As a follow-up on my off-time from work, I spent a bit of time loading the firmware and so we are now active again.
Solution Report:: What I did was loaded the firmware (again / reload) as per the directions from a YOUTUBE video about title subject.
sincere thanks for the help to the users within.
A. (me)