You are here

Nanobeam M5 16 software error

7 posts / 0 new
Last post
Wa9kje
Wa9kje's picture
Nanobeam M5 16 software error
Hi,
I have installed software on 2 Bullet M5s with no problem.
I just received a Nanobeam M5 16 with Ubnt 5.5 software which checks out "Good/Good" with the AREDN test program.

I select the Factory Software for upload, the upload %counter counts up and I receive error -6.

Any suggestions?


Best,
Sonny, WA9KJE 
K5DLQ
K5DLQ's picture
that is an unsupported device
that is an unsupported device at the moment.
Always check the "Supported Platform Matrix" under the "Software" menu, and/or under the "Docs"menu.
K6AH
K6AH's picture
NBE-M5-19 XW Support

The NanoBeam NBE-M5-19 is an XW device.  See our support matrix at http://www.aredn.org/content/supported-platform-matrix ...  Support for it will dependent on the development team solving issues with the XW hardware.
 

Wa9kje
Wa9kje's picture
Rats!
Rats!
I misread the table.
It is a nice self contained unit, antenna & radio in one unit.

Best,
Sonny WA9KJE
K6OQK
K6OQK's picture
Rats...
Rats, you say! Good to see you diving in face first. I'm about to start collecting stuffs for a two-way link to Mt. Wilson. Burt, K6OQK
Wa9kje
Wa9kje's picture
We can set up a link between
We can set up a link between the 2 of us!

Always face first.  I am going to blame it on you.

Snarley, WA9KJE
K5DLQ
K5DLQ's picture
i agree.  I have an NBE-M5-19
i agree.  I have an NBE-M5-19 too.  nice unit.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer