You are here

Home » Forums » Hardware » Nodes

Reset MIKROTIK hAP ac lite

5 posts / 0 new
Log in or register to post comments
Last post
Thu, 08/12/2021 - 13:32
#1
KI0KY
Reset MIKROTIK hAP ac lite

I have done something to the MIKROTIK hAP ac lite so that using a either net cable to a lan port entering localnode.local.mesh:8080 returns "localnode.local.mesh's server address could not be found." I have tried three times to reset the unit using the power off, press reset with power on.
Suggestions please.
Steve KI0KY

Top
Thu, 08/12/2021 - 14:28
w6bi
w6bi's picture
Testing.
You didn't say if it was configured or not.  If it's not, can you ping 192.168.1.1?   You might try that even if it was configured; if it responds, it's reverted to the unconfigured state.

Orv W6BI
Top
Thu, 08/12/2021 - 14:57
KI0KY
Orv,
Orv,
192.168.1.1 did the trick.  What is the correct sequence of connecting the power and pressing the reset switch for what I need to know for AREDN.  It appears there are several combinations for rebooting.
THANKS,
Steve
Top
Thu, 08/12/2021 - 15:47
w6bi
w6bi's picture
Info here!
I knew I'd seen it in the AREDN Online docs.  It's here: https://arednmesh.readthedocs.io/en/latest/arednGettingStarted/advanced_...

Orv
Top
Thu, 08/12/2021 - 15:58
(Reply to #4)
kk6ffz
a
Hold for 5 seconds to reset the password and DHCP service
Hold for 15 seconds to return the node to “just-flashed” condition

I did the 15 second hold and was able to log in again. Make sure you turn on get a dhcp address automatically instead of keep a static ip.... That was my problem last week :)
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer