You are here

Home » Forums » Hardware

RB912UAG-5HPnD - mini pcie card.

5 posts / 0 new
Log in or register to post comments
Last post
Sun, 05/23/2021 - 09:39
#1
kc7dmf
RB912UAG-5HPnD - mini pcie card.

Hello,
Does anyone know if the add on mini pcie card is supported with AREDN firmware?
If it is can you do simultaneous 2.3Ghz and 5.8Ghz, or is it just one at a time. 

Mikrotik R11E-2HPND Internal RF Wireless Networking Card
https://www.amazon.com/Mikrotik-4-MikroTik-R11e-2HPnD/dp/B00I4QFCU0/ref=...


73
Mark
KC7DMF

Top
Sun, 05/23/2021 - 10:32
nc8q
nc8q's picture
is _ supported with AREDN firmware?

The AREDN firmware is based on OpenWrt with additional packages and patches.
A Makefile automates the entire process to create firmware images.
https://github.com/aredn/aredn

My impressions:


I hope this helps,
Chuck

Top
Fri, 05/28/2021 - 10:35
K5DLQ
K5DLQ's picture
currently, the firmware only
currently, the firmware only supports one mesh interface, but, we are working on supporting 2.
 
Top
Fri, 06/04/2021 - 09:22
(Reply to #3)
kc7dmf
That would be good. 
That would be good. 

Hopefully more hardware (the newer ubiquit radios etc) will gain support at some point. 


Thanks...

 
Top
Wed, 06/09/2021 - 13:49
(Reply to #4)
KM6SLF
KM6SLF's picture
A second mesh interface, for
A second mesh interface, for some devices, would be fantastic. Another feature that might be valuable, especially for testing, but also for reducing data usage on metered connections, would be allowing users to set the link cost value in the settings or advanced settings section. Do you see any value in a feature like that?
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer