Hi All,
Just cross-posting in case anyone has a need to find these details in the future:
https://www.arednmesh.org/content/tplink-cpe610-boot-loop
Wade
VK1MIC
Just cross-posting in case anyone has a need to find these details in the future:
https://www.arednmesh.org/content/tplink-cpe610-boot-loop
Wade
VK1MIC
VK1MIC I have created and image for you to test.
https://andynet.duckdns.org/nextcloud/index.php/s/5bQXTye3BHYG4nd
As I do not have a TP-LINK CPE610 v2 I am unable to test if it will work.
Please test and post the results of your testing.
If it works please attach a copy of the supportdata from the Administration Page.
NOTE: I will be removing this image in the next few days so this link will only work for a few days.
W
I know its a few days late for the miracles- but you have only gone and made it bloody work!!
Admin support data: https://www.dropbox.com/s/k529per861rdsvz/supportdata-vk1mic-tplink-2dis...
tell me when you have got it
I am going to make one more update to the code and send you another round to test in the next day or so.
I have downloaded the Support Data and will review it to see if it looks correct.
I have created a new image and placed it at the same location
https://andynet.duckdns.org/nextcloud/index.php/s/5bQXTye3BHYG4nd
Please download it and update your device via the Administration page.
The first time is will probably complain about the image but you can override it.
Then once it has reloaded upgrade it again. This time is should not complain about the image.
The image adds support for this device to the upgrade option so it will not complain.
Please let me know the results of your testing.
Wade
Once its approved it will be in the Nightly Builds
there is my device and another 2 from a mate who will be running your v2.2 pre nightly build firmware testing
I talked him through it last night. W
My PR has been approved so it will appear in the nightly build in a day or so under the ath79 branch.