Ubiquiti EdgeSwitch8(XP) setup

4 posts / 0 new

Tue, 02/25/2020 - 14:26

NJ1Q

Hi all,

Any recommendations/suggestions as to how this switch should be configured for AREDN use? Should I pattern it off the Netgear GS108E?

This switch has PoE (24/48v) capabilities.

Thanks!

73,

Joe, NJ1Q

Tue, 02/25/2020 - 16:37

K6AH

Moe like the TS-5 and TS-8

I believe this switch uses the same management interface as the ToughSwitch-5 and -8. I'd use this model: https://www.arednmesh.org/switch-ubiquiti

Tue, 02/25/2020 - 20:55

(Reply to #2) #3

NJ1Q

Thanks Andre.

Thanks Andre.

This switch has 8 ports. Therefore, I gather I'm looking at 3 node, 4 LAN, 1 WAN.

The plan is to have three (3) Rocket M5s, with the MIMO antennas and RF Armor. I didn't find a model for the TS-8. But it looks as though I'd pattern it off the 1 LAN, 3 NODE, 1 WAN configuration, and just expand to 4 LAN.

73,

Joe, NJ1Q

Tue, 02/25/2020 - 21:42

(Reply to #3) #4

K6AH

Yep, sounds right to me

Yep, sounds right to me. Although you might as well add another NODE and another LAN to fill out the switch.

Amateur Radio Emergency Data Network

Menu SF

You are here

Ubiquiti EdgeSwitch8(XP) setup

Amateur Radio Emergency Data Network

Search form

Menu SF

You are here

Ubiquiti EdgeSwitch8(XP) setup