Two way path

So of course embedded images don't work. Meh!

See attachments.

All,

Hope your holidays were absolutely outstanding!

I have been engaged in a private email conversation with Joe regarding the trunking og two freepbx servers. One on the mesh and one on my local network.

Base on some good information from Joe... and fixing some idiocy on my part I can now make a call from a mesh connected phone to a locally connected phone.

The issue has been I can't make calls from the locally connected phone to the mesh connected phone.

I am using iax2 for the trunking protocol. It's much simpler than a SIP trunk. It only requires an open UDP port at 4569.

Here are some screenshots that show what I have currently configured.





Joe, among other things thought I might have to build a custom route using the 59-custom-rules file.

I have looked at the file and really don't have a clue as to how I might set things up there.

#iptables -t nat -A zone_wan_prerouting       -p tcp -m tcp --dport 8082                -j DNAT             --to <IP address of ipcam>            -m comment --comment "my mesh ipCam"
#iptables -t nat -A zone_wifi_postrouting     -p tcp -m tcp -d <IP address of ipcam>    -j SNAT --dport 80  --to-source <IP wifi on this node>    -m comment --comment "my mesh ipCam"
#iptables -t nat -A zone_dtdlink_postrouting  -p tcp -m tcp -d <IP address of ipcam>    -j SNAT --dport 80  --to-source <IP dtdlink on this node> -m comment --comment "my mesh ipCam"

For one, what is a dtdlink ip address?

Here is a bit more info on the node in question.

This has been particular frustrating in that terms and definitions unique to mesh networking are sparse.

I'd appreciate any help you folks can provide.

73,

Chuck
WB6YOK