You are here

Home » Forums » Development » Possible Bugs

TP-Link Internal Switch config?

3 posts / 0 new
Log in or register to post comments
Last post
Mon, 03/25/2019 - 20:13
#1
w6bi
w6bi's picture
TP-Link Internal Switch config?
With the latest code, the internal switch in the Ubiquiti Nanostation XW hardware was converted to a vanilla, non-VLAN-aware switch, as far as I understand.

I put the latest code on a TP-Link CPE210 (v1.0) and found that its switch configuration is unchanged; the stock configure has VLAN 1 on the primary port and VLAN 2 on the secondary port.  This can be changed by modifying /etc/config/network, but it's a transient change; won't survive a reboot.

Are there plans to convert the TP-Link internal switch the same as has been done with the Ubiquiti?

Orv W6BI
Top
Mon, 03/25/2019 - 22:41
ZL2AQY
ZL2AQY's picture
The TP-Link cpe220v2 has the
The TP-Link cpe220v2 has the same problem.
Top
Tue, 03/26/2019 - 16:40
AE6XE
AE6XE's picture
The TP-Link devices are in
The TP-Link devices are in the queue :) to make the ports AREDN standard.   The newer hardware versions only have 1 port, thus not affected.  I've not investigated how easy or hard this will be.  But, let me take a quick look in case it is a simple change.
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer