I have recently obtained two loco 5ghz NanoStations running WA.V8.4.2 ubnt firmware. I have tryed several times to load the AREDN firmware via the TFTP method and it fails every time. Using 3.18.9.0-ubnt-loco-m-xw-factory.bin or 3.18.9.0-ubnt-bullet-m-factory.bin. fail to flash. I have not had any problems with and other devices, Nanostations, Nanobeams, Nanobridges, Bullets, but this one has me stumped. What am I missing? I know there are no lights to indicate its in the TFTP mode but im using the same procedure as with all other devices, and it except the bin file from TFTP loader until the end, then gives me a TFTP:2: Firmware check fail. Am I using the wrong firmware or procedure on this device? Thanks.
Eric
N7JYS
Eric
N7JYS
Ubiquiti AC devices are not supported by the AREDN firmware. Currently supported devices are listed in the Supported Platform Matrix.