You are here

Home » Forums » Development » Possible Bugs

Problem restarting vtund

8 posts / 0 new
Log in or register to post comments
Last post
Mon, 01/17/2022 - 21:16
#1
KB9MTD
Problem restarting vtund
Not sure how to correct other than reflash with older firmware. I've tried to restart the service without success. Any help will be entertained. Error is below. It stops all Tunneling in and out. Problem restarting vtund Change file from .doc to .jpg in file attachment Aaron
File Attachment: 
Microsoft Office document icon FB_IMG_1642471666187.doc
Top
Mon, 01/17/2022 - 22:20
K5DLQ
K5DLQ's picture
what firmware version?
what firmware version?
What error do you see in the UI?

 
Top
Mon, 01/17/2022 - 22:40
(Reply to #2)
KB9MTD
Sorry.
Sorry. Latest 3.22.1.0 UI stated 'Problem restarting vtund' Tried to stop, start and restart via CLI with no luck.
Top
Mon, 01/17/2022 - 22:43
AE6XE
AE6XE's picture
unable to reproduce on 3.22.1
unable to reproduce on 3.22.1.0.   I have a live tunnel client.  "/etc/init.d/vtund restart" succeeded with no warnings or errors. 

Please attach support data file.

Joe AE6XE
Top
Mon, 01/17/2022 - 22:46
KB9MTD
File attached here
File attached here
Support File Attachments: 
File supportdata-KB9MTD-1-202201172143.tgz
Top
Mon, 01/17/2022 - 23:24
KB9MTD
*** Update ***
Reflashed and no error; all connected
Top
Mon, 01/17/2022 - 23:47
AE6XE
AE6XE's picture
missing vtun config file
KB9MTD,   The configuration file of your tunnels does not exist "/etc/config/vtun".     Did anything unusual occur when upgrading firmware?   The "keep settings" box was checked?     What does the tunnel setting pages look like?    Most likely  to set back up, the only option is in the tunnel setup pages, re-enter the data :( .   

I've gone through this process, including tower sites with the 3.22.1.0 release and have not seen any issue with tunnel setup on a Rocket and hap-ac-lite.  Unless others report the same issue, something local must have happened.   I see your device is an TP-LINK CPE210 v2.    Maybe, something unique to this model, but I'd be very surprised. 

Regards,
Joe AE6XE
Top
Mon, 01/17/2022 - 23:57
(Reply to #7)
KB9MTD
Joe,
Joe, Checkbox was auto checked I confirmed it because I was fearful I may loose info in the rewrite. No visible issues when reflashing the first time. Fluke maybe? I've found out at work that sometimes you either just need a power cycle or to simply reload. No worries. Thanks for your help! Aaron
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer