A couple of us have noticed that the recent beta seems to break the Charts function and this has been verified on a NanoBridge, MikroTik SXTsq as well as Meraki MR16. (FW ver. 405-49017f4)
73 - Mike, AB4YY
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
With that said, I can answer. Tested on several of my nodes. The chart appears to be normal when it is displaying the average for all connected nodes. However the dropdown to select which station is not. At home, I have three nodes that talk to each other on 2 GHz. On the hAP, it only displayed the MAC for one of the other nodes. On the USB150, it only displayed the IP address of one ot the other nodes, and on LHG 2nD it listed one IP and the name of one node. I looked at several other nodes that only have a single RF connection. They all just showed an IP address. All nodes that I tested were correctly showing node names on the Mesh Status listing.
- Mike
All of my nodes are running Nightly 405. Looking at charts is not something I look at very often, so I can't tell you when the problem started.
These commands were on a hAP ac that has two RF connections. The MAC listed in the first command is one of them - the RB-LHG-2nD-XL
root@K6CCC-hAP-at-Home:~/snrlog# ls -la
drwxr-xr-x 2 root root 60 Jun 18 10:03 .
drwxrwxrwt 17 root root 560 Jun 23 07:55 ..
-rw-r--r-- 1 root root 0 Jun 18 10:03 b8:69:f4:b8:5a:eb-
root@K6CCC-hAP-at-Home:~/snrlog#
root@K6CCC-hAP-at-Home:~# /usr/local/bin/snrlog
/usr/bin/lua: /usr/local/bin/snrlog:97: attempt to perform arithmetic on field 'lastseen' (a nil value)
stack traceback:
/usr/local/bin/snrlog:97: in function 'create'
/usr/local/bin/snrlog:354: in main chunk
[C]: ?
root@K6CCC-hAP-at-Home:~#
Hope that helps..
Right now only my location has the Beta as it was removed from the other nodes and the Release version installed.
Right now I have Beta FW ver. 405-49017f4 on a Meraki M16 and a NanoBridge.
Looking at the NanoBridge with ssh and doing a "ll" I see this:
whereas on a node with the Release FW version the MAC is followed by the node name.
- Mike
RE: /usr/local/bin/snrlog
I just ran that, a few times:
Submitted a fix for this issue to the code repository on github. Pending review by the development team, this should be available in a forthcoming Nightly Build.
UPDATE: This fix is now in Nightly Build 433 and newer going forward.