You are here

Home » Forums » Deployment

TFTP problem loading to Nanostation M5

4 posts / 0 new
Log in or register to post comments
Last post
Mon, 02/25/2019 - 17:51
#1
WM6Q
WM6Q's picture
TFTP problem loading to Nanostation M5

This is probably a rookie problem, and if answered elsewhere, please point me. I am trying to upload firmware to a Nanostation M5. I haven't used TFTP before, but what I see on the command line is different from what is on the detailed instructions for the M5. For example, there is no "bin" command; so, I am unsure of what commands to use to load the file to the M5. I can get to the AirOS on the M5, I can get the 1-3, 2-4 lights on the M5 when I put it in TFTP mode. Any help would be appreciated.

Bob WM6Q

Top
Mon, 02/25/2019 - 18:07
K5DLQ
K5DLQ's picture
'bin' is a command that you
'bin' is a command that you issue inside your tftp client.   Or, if it is a GUI client, you may see an option for "Binary Transfer Mode", or, similar.
that's what is does.
Top
Mon, 02/25/2019 - 18:19
(Reply to #2)
WM6Q
WM6Q's picture
I am using a cmd line
I am using a cmd line starting "TFTP", so I don't have a GUI client. I was just trying to follow the AREDNMESH detailed instructions, which don;t match what I see on the screen. Sorry, have never used TFTP before

Bob
Top
Wed, 02/27/2019 - 10:34
KE8GTP
tftp command

From windows once you have the tftp client installed you can use this command to upload the factory firmware.

tftp -i 192.168.1.20 PUT "[PATH TO BIN FILE]"

Matthew

Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer