You are here

Home » Forums » General discussion

Much Confusion.

4 posts / 0 new
Log in or register to post comments
Last post
Tue, 10/02/2018 - 01:19
#1
VE7TFM
VE7TFM's picture
Much Confusion.
OK,  Got all the nodes up and running 3.18.9.0

Thanks to the team for all your hard work.

I have a bunch of new PBE-M5-400 to install AREDN on.  They are all v6.1.4 (XW)

What is the recomended way to install AREDN on these?

Thanks.

Ted
Top
Tue, 10/02/2018 - 09:32
K5DLQ
K5DLQ's picture
1) download the rocket-m-xw
1) download the rocket-m-xw FACTORY firmware from the SOFTWARE menu above.
2) Perform a TFTP installation of this firmware.

If you've never performed a TFTP install... for instructions, about HALF-WAY down on this page: https://www.arednmesh.org/content/uploading-firmware-ubiquiti, you will see:  Recovery installation of AREDN firmware via TFTP.   Follow those steps.
Top
Tue, 10/02/2018 - 11:57
(Reply to #2)
K6AH
K6AH's picture
Line 'em up!
Using tftp you can line all the devices up and do one after the other (assuming they are all the same type). 
Top
Mon, 10/08/2018 - 02:09
(Reply to #3)
VE7TFM
VE7TFM's picture
Success
Thank You.
I am generally operating in linux so the command line is no stranger.
I found a useful description here: 
https://help.ubnt.com/hc/en-us/articles/204911324-airMAX-How-to-reset-yo...
Recovering or pushing a new operating system.
 
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer