You are here

Weather station for mesh

3 posts / 0 new
Last post
kj6ffp
Weather station for mesh
I am looking for recommendations a weather station that can go on a tower and will last for a long time in harsh weather conditions.  
My requirements are it needs to have a web interface for the reports.    Wind direction, speed, rain amounts, temp and I think that is it.  Other features are just a bonus.  Something that will survive occasional snow, freezing, and the heat you would expect on a rock faced mountain on a tower.  Not a cheap unit.  Has to be something that will last.  

Thank you.  

Robert 
KJ6FFP
w6bi
w6bi's picture
Weather stations
We have the same requirements.  According to a weather geek site, the anemometers on the Peet Bros. Ultimeter weather stations are guaranteed to 200 mph.  We've had several anemometers spun off their mounts at our windiest sites (100 mph+), so we're looking at that equipment.
I don't know of any offhand that natively support a web page (I'm sure there are some). 
We use weewx software (at weewx.com) for generating weather web pages.   It's open source software, runs on several different OSes, supports tons of different hardware, and runs easily on a Raspberry Pi running Raspbian.

Orv
W6BI
w2rwj
Re: Weather station for mesh

I am using a system sold by Columbia Weather Systems in two locations. The sensor is made by Vaisala, part number WXT510 paired with the Columbia Microserver. 

Not cheap by any standard, however rock solid and reliable:  https://columbiaweather.com/products/weather-monitoring/microserver/ (uptime is greater than 8 years on one site)

73 Martin
W2RWJ

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer