Just successfully flashed a NanoStation M5 XW, change NOCALL-132-88-175 to KC7ZDM-NANOSTN-06, enter the password (twice), change the distance parameter, select the 13 host direct option, click Save Changes and the page instantly goes away and displays This site can't be reached. The node does not reboot. When I go back to access localnode:8080 all the parameters are back the way they were.
Any ideas on what's happening? This is the factory edition, haven't had a chance to upgrade yet. The firmware I applied was AREDN-3.16.1.1-ubnt-nano-m-xw-squashfs-factory.bin.
FYI, I did run the U-Boot utility first got a Bad/Good result, backed it up, downgraded to XW.v5.5.10-u2.28005.150723.1358.bin successfully, re-ran U-Boot and got a Good/Good result. No issues with flashing the firmware up until I thought I was home free entering my call, etc.
Any ideas on what's happening? This is the factory edition, haven't had a chance to upgrade yet. The firmware I applied was AREDN-3.16.1.1-ubnt-nano-m-xw-squashfs-factory.bin.
FYI, I did run the U-Boot utility first got a Bad/Good result, backed it up, downgraded to XW.v5.5.10-u2.28005.150723.1358.bin successfully, re-ran U-Boot and got a Good/Good result. No issues with flashing the firmware up until I thought I was home free entering my call, etc.
Thanks!