Hey, hope this lands in the right forum.
I've currently got a setup with a bullet mounted on my roof, running into a configured GS-108 switch. My bullet seems to be very inconsistent - resetting and not staying on the air, etc. Unfortunately there isn't much chance I can get to the bullet to service it.
My GS-108 is programmed up with 1 Node port, 5 LAN ports and 2 WAN ports.
Could I substitute an AirRouterHP, which I already have, for the bullet, and if so how would I connect it up and not cause a network loop?
Or, am I better off just getting my hands on another bullet?
And, is there a way to download and store all my tunnel connections and DHCP reservations, or am I going to have to manually re-enter all of them?
Sighs
Thanks for your help!
Scott, KB5ZVP
I've currently got a setup with a bullet mounted on my roof, running into a configured GS-108 switch. My bullet seems to be very inconsistent - resetting and not staying on the air, etc. Unfortunately there isn't much chance I can get to the bullet to service it.
My GS-108 is programmed up with 1 Node port, 5 LAN ports and 2 WAN ports.
Could I substitute an AirRouterHP, which I already have, for the bullet, and if so how would I connect it up and not cause a network loop?
Or, am I better off just getting my hands on another bullet?
And, is there a way to download and store all my tunnel connections and DHCP reservations, or am I going to have to manually re-enter all of them?
Sighs
Thanks for your help!
Scott, KB5ZVP
BULLET---->GS-108------>ISP??? And you are running the tunnel on the bullet?
I was having similar issues when I first set mine up that way.
Everything started running perfectly after I got an Air router and dedicated it as my "mesh gateway" device, including the tunnel duties.
So now it looks like this:
BULLET(on tower) ---->DTD-link----> AirRouter(tunnel client plus advertised services) ----> ISP
You can also link the devices on the RF side, but DtD should work better.
BTW, I saw your HH node on the AREDN map, but not over the air. Is that the node you are having issues with?